The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
Animated Danagri-3S Logo
Home & Info ⩔ Grain Storage ⩔ Grain Drying ⩔ Grain Handling ⩔ Straw ⩔ Mill & Mix ⩔ HFS Liquid Feeding Diet Mixers ⩔ Flour Milling ⩔ Wood Pellets/Chips ⩔
Grain Drying ⩔ Fans & Heaters ⩔ In-Bin Stirrer Systems ⩔ Farm Fans/GSI Driers ⩔ Top Dry ⩔ Grain Store Agitator ⩔ On Floor Grain Drying ⩔ Grain/Air Ducting ⩔ Installations & Gallery ⩔ Grain Drying Downloads ⩔
Danagri-3S supplies the GSI Modular Tower Dryer Series for grain drying.

The GSI Modular Tower Dryer uses modular construction to improve overall fit, dependability and speed of installation. The option of factory assembly inmodules has several advantages:

The GSI Modular Tower Dryer from Danagri-3S.
  • Assembly at GSI's state of the art manufacturing plant means labour time on site is reduced and labour efficiency can be maximized.
  • The use of specially built jigs ensures that each module is exactly right, ready to fasten to the other modules with a minimum of adjustment or work.
  • Shipping in modules means fewer part backorders due to limited availability or damage to parts in transit.
  • On site assembly can be done quickly with a crane with almost all work occurring close to the ground.
  • The modular design allows for a standard adjustable unload auger that extends past the outside edge of the dryer with a clearance of 8" to 42", with the option to direct discharge at the center of the dryer with 24" of clearance.
  • Safety and operational devices are pre-installed on each module. Wire and conduit are ready to uncoil and wire to the main control boxes reducing time and chance of error.
  • Control boxes, though remote install capable, are mounted on the base module ready to accept the wiring from the other modules.
  • Controls are pre-powered and all module wiring and components pre-tested to assure correct operation and improved dependability at startup.
  • Modular construction makes relocating the dryer easier.
Back to the top of the page.
The GSI T-Series Modular Tower Dryer from Danagri-3S.FEATURES

1. Gravity inlet does not require leveling auger, reducing the number of moving parts.
2. Self cleaning cushion box on the plenum roof reduces grain damage and plenum roof wear.
3. Motorized grain level monitor designed for trouble free positive control.
4. The 12-3/4" grain columns surrounding the heat plenum chamber allows the grain to receive all BTU's from the burner, improving efficiency while providing superior noise reduction.

5. Uniform low velocity heated air improves efficiency and quality as well as reducing particulate emissions.
6. Patented, stainless steel grain inverters equalize column moisture content and temperature of the grain column, greatly improving quality and efficiency.
7. Stainless Steel outside sheets greatly extends the life and appearance of the dryer. The screens utilize different perforation sizes to reduce emissions.
8. Divider hopper prevents particulate build up in the heat plenum chamber and simplifies maintenance.

9. Recycling heat from the cooling grain results in significant fuel savings.
10. The sealed discharge section retains particulate matter.
11. GSI's state of the art Vision Control Panel.
12. A specially designed flow control system houses the Moisture Control Sensor. This insures a constant accurate reading from the sensor back to the Moisture Control System.
Back to the top of the page.

GSI Modular Dryers have a unique and patent pending feature called the Adjustable Cooling Floor. This floor allows two major improvements to the dryers operation. This feature involves 8 easily moved doors that can change the split from approximately 67/33 to 80/20 and back again in a matter of minutes. Each door can be locked in either position from the service area in the cooling section of the dryer.

In addition, the Modular Tower Dryer features a self cleaning design. Specially designed divider floors allow any chaff or fines that would otherwise accumulate in the heat chamber to drop into the cooling chamber.
There are 4 models in the Series: TM-1008, TM-1010, TM-1012 & TM-1015, ranging from 10' 7" dia. x 42' 1" height to 10' 7" dia. x 62' 7" height.
For more information, call or email Danagri-3S, or download the brochure from the Grain Drying Downloads page, here.
Back to the top of the page.
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.