The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
E-mail:
Animated Danagri-3S Logo
Home & Info ⩔ Grain Storage ⩔ Grain Drying ⩔ Grain Handling ⩔ Straw ⩔ Mill & Mix ⩔ HFS Liquid Feeding Diet Mixers ⩔ Flour Milling ⩔ Wood Pellets/Chips ⩔
Round Silos ⩔ Square Silos ⩔ Hopper Bottomed Silos ⩔ Aeration Systems ⩔ Emptying Systems ⩔ Grain Spreaders ⩔ Installations & Gallery ⩔ Grain Storage Downloads ⩔
The LevALERT® BIN LEVEL INDICATOR FROM DANAGRI-3S
Danagri-3S supplies the new LevALERT® Bin Level Indicator.

How it Works

As your bin material reaches the LevALERT® Indicator, it pushes against the rubber activator, turning the colour tube from black to a bright yellow colour. When the material recedes it automatically darkens again - ready for the next fill!

The LevALERT® Indicator can sense most any granular bulk solids ranging from pellets to powders that weight between 5 to 100 lbs./cubic foot (80 to 1,600 kg./cubic metre).

Typical uses include:
  • Agricultural Grains and Feeds
  • Plastic Pellets
  • Fertilizer
  • Minerals
  • Cement Powders
  • Sand
...to name a few. Just about anything you'd store in a bin.

Easy to Use

You can install the LevALERT® Indicator anywhere along the vertical wall section at critical key levels most important to you. Such as an upper level to alert you when the bin is full or at low level to alert you that the bin is empty.

Easy to See

Highly visible 3M® reflective lemon yellow and the black colour change makes it easy for anyone to see the bin's level day or night from over 300 feet away. A large black diamond shaped sticker creates a perfect background which allows the eye to instantly focus where the LevALERT® Indicators are installed and sets off the yellow "on" colour.

In a glance the LevALERT® Indicator shows you the level of material in your bin while you remain safely on the ground.

Easy to Install

LevALERT® Indicator comes completely assembled and ready for installation. Simply drill one 1-1/16" diameter hole (hole saws work great), roll up the rubber activator into tubular shape and push it through the hole. Then drive in 2 self-drilling screws to firmly secure the body of the indicator to the bin wall - all from the outside of the bin! Fast, easy and with a minimum of tools.

Tools Needed:
  • Powered drill with 1/2" chuck
  • 1-1/16" drill bit or hole saw
  • Round metal file to deburr hole
  • Centre punch and hammer
  • 5/16" hex socket driver
Click the logo below to visit the LevALERT® website (opens in a new tab/window).



The LevALERT® Indicator fitted onto a silo
Back to the top of the page.
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail: