The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
E-mail:
Animated Danagri-3S Logo
Home & Info ⩔ Grain Storage ⩔ Grain Drying ⩔ Grain Handling ⩔ Straw ⩔ Mill & Mix ⩔ HFS Liquid Feeding Diet Mixers ⩔ Flour Milling ⩔ Wood Pellets/Chips ⩔
Straw Intro ⩔ Feed Tables ⩔ Shredders ⩔ Mills ⩔ Dust Extraction ⩔ Reverse Jet Filters ⩔ Straw Download ⩔ Installations & Gallery ⩔
STRAW PROCESSING MIXERS & BUFFER SILOS PAGE
Multimix MTX supplied by Danagri-3SCormall specialise in producing mixers which can cope with straw, molasses and minerals etc for producing straw-based diets. Cormall mixers have been proven over many years of operation. We also produce a range of Buffer Silos which keep straw moving and 'fluid', this is especially important in plants that feed briquetters and pelleters.

The Cormall Multimix MTX (right) supplied by Danagri-3S.

Mixing principle
All materials are loaded into the lower end of the mixer and is transported by the two augers to the top where the opposite mounted auger blades combined with out casters push the material upwards into what can be described as a molehill, where it falls naturally backwards.

The mixing principle of the Multimix MTXThe mixing of the various components is carried out in the augers during transport upwards and in the molehill. Smaller quantities should be loaded first before the bulkier components, thus ensuring that vitamins and minerals are equally mixed in the diet.

The mixer transmission is at the top, allowing the top of the auger to move 50 mm up and down, so that stones will not be crushed but simply lift the auger. This method also works very efficiently when using straw in the mixer, thus allowing the augers to work themselves free, when the material starts to compress itself between the machine and the auger.

The main hopper is constructed with thicker 10 mm plating and the auger size increased to 15 mm. Combined with very low energy usage that is needed for mixing gives greater strength and a longer lifespan.

The low filling height of the mixer allows you to use smaller equipment for loading. The mixing process can be observed without having to climb on the machine by watching from the tractor of from the floor level.

Back to the top of the page.

The Cormall MTX-H Mixer Shredder and hammer mill from Danagri-3S
The Cormall Scratcher, stone trap and hammer mill
The Cormall MTX-H Mixer Shredder, distribution silo feeding 2 x hammer mills
The Cormall MTX-H Mixer Shredder, scratcher, stone trap & HD hammer mill
The Cormall MTX-H Mixer Shredder and hammer mill from Danagri-3S
The Cormall MTX-H Mixer Shredder and hammer mill from Danagri-3S
STRAW
The straw in a ration should be ground with medium size screens using a Cormall Straw Mill which will produce a soft material of suitable length, easy to be mixed with any other dry or wet material. An agitator prevents sticky material from forming lumps. Self cleaning sprockets on the stub axels increase reliability. Chains and slats in combination with the agitator give a homogeneous mix. The emptying auger is controlled by means of a hand wheel and a shutter, unloading to a feeder wagon or for bagging off.

FOR MIXING: cattle feed, horse feed, sheep and goat feed, strawmix, complete diet rations, sphagnum, soil for flowerpots.

FOR METERING: feed, straw, sawdust chips etc. for briquetting, baling, or pelleting machines, sphagnum and flowerpot soil for potting machines, or as a holding bin for bagging.

Back to the top of the page.
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail: